Manufacturer Part#: Cisco WS-C5509
WS-C5509 Cisco Catalyst 5000 Series switch
WS-C5509 Switch Chassis - 9 x Expansion Slot
Cisco Catalyst 5509 Switch has 9 slots and is ideally suited for both wiring closet and backbone applications. As a low cost wiring closet solution, the Catalyst 5509 supports high density, dedicated Token Ring or 10/100/1000 ethernet switching. The Catalyst 5509 can support high density switching with only a 15 Amp circuit requirement, allowing for easy installation in most wiring closet environments. The Catalyst 5509 also supports all of Cisco's advanced features for the wiring closet, such as automatic protocol broadcast filtering to conserve valuable bandwidth, intelligent multicast forwarding to handle multimedia traffic, and load balancing over redundant links.
Cisco WS-C5509 General Information:
Manufacturer: Cisco Systems, Inc
Brand Name: Cisco
Product Line: Catalyst
Product Series: 5500
Product Name: Catalyst 5509 Switch Chassis
Product Type: Switch Chassis
Cisco WS-C5509 Interfaces/Ports:
Interfaces/Ports: LAN
Cisco WS-C5509 Media & Performance:
Connectivity Media: Not Applicable
Distance Support: Not Applicable
Performance: 50Gbps Forwarding Bandwidth
Performance: 3.6Gbps Bandwidth
Cisco WS-C5509 I/O Expansions:
Number of Expansion Slots: 9
Expansion Slots: (9 Total) Expansion Slot
Modules: Not Included
Cisco WS-C5509 Network & Communication:
Flow Control: IEEE 802.3x (Full-duplex)
Cisco WS-C5509 Management & Protocols:
Manageable: Yes
Management:
•CiscoWorks for Switched Internetworks (CWSI) Campus, a graphical user interface (GUI) based product for managing Catalyst and LightStream switches, includes the following applications:
CiscoView device configuration software
VlanDirector software
TrafficDirector software
AtmDirector software
Resource Manager Essentials
Netsys Technologies
Enhanced Switched Port Analyzer (SPAN)
Port snooping and connection steering
Text-based command-line interface based on familiar router interface
Telnet
Trivial File Transfer Protocol (TFTP)
BOOTP
LEC
Protocols: CDP
Protocols: VTP
Security Features:
•Standard Cisco IOS security capabilities: passwords and TACACS+
Cisco WS-C5509 Controls/Indicators:
Status Indicators:
•System status: green (operational)/red (faulty)
•Switch load: 1- to 100 percent aggregate switching usage
•Link good: green (good)/orange (disabled)/off (not connected)
•100-Mbps Fast Ethernet: green (100 Mbps)
•Power supply status: green (on)/red (faulty)/off (not present)
•Fan status: green (on)/red (faulty)
•Auxiliary port (Supervisor Engine III only)
•RJ-45 (female) data terminal equipment (DTE)
Cisco WS-C5509 Reliability:
MTBF: 7Year
Cisco WS-C5509 Power Description:
Input Voltage: 220V AC
Input Voltage: 110V AC
Input Current: 12 A @ 100V AC Maximum
Input Current: 6 A @ 200V AC Maximum
Frequency: 50 Hz or 60 Hz
Power Consumption: 805 W
Power Source: Power Supply
Redundant Power Supply: Yes
Cisco WS-C5509 Environmental Conditions:
Temperature: -40 degrees F (-40.0 degrees C) to 167 degrees F (75.0 degrees C) Storage
Temperature: 32 degrees F (0.0 degrees C) to 104 degrees F (40.0 degrees C) Operating
Humidity: 10% to 90% Non-condensing Relative Humidity Operating
Altitude: -196.84 ft to 13123.32 ft Operating
Thermal Dissipation: 3920 BTU/h @ 1150W
Cisco WS-C5509 Physical Characteristics:
Color: Black
Dimensions: 20 Height x 17.25 Width x 18.4 Depth
Shipping Dimensions: 24.5 Height x 22.5 Width x 31.75 Depth
Weight: 150lb
Weight: 55lb
Cisco WS-C5509 Miscellaneous:
•Supervisor Engine I, II: DB-25 (female) data communications equipment (DCE)
•Supervisor Engine III: RJ-45 (female) DCE
Maximum Number of Interfaces per Chassis :
•Gigabit Ethernet: 38
•Group-Switched 10BaseT Ethernet: 384
•Switched 10BaseT Ethernet (RJ-21): 384
•Switched 10BaseT Ethernet (RJ-45): 192
•Switched 10BaseFL Ethernet: 96
•Group-Switched 100BaseTX Ethernet: 192
•Switched 10/100BaseTX Backbone: 194
•Switched 10/100BaseTX Desktop: 194
•Switched 100BaseFX: 98
•ATM Uplink: 7 (dual PHY)
•CDDI/FDDI: 8
System Requirements:
•Software requirements: Catalyst 5500 Family supervisor software 4.2(1) or higher
Certifications & Standards:
•IEEE 802.1Q
•IEEE 802.1p
•IEEE 802.3x
•RFCs 1155-1157: Simple Network Management Protocol (SNMP) agent V.1
•SNMPv2c
•Cisco WorkGroup Management Information Base (MIB)
•RFC 1643: Ethernet MIB
•RFC 1516: Ethernet repeater MIB
•RFC 1213: SNMP MIB II
•RFC 1757: Remote Monitoring (RMON)
•RFC 1573: Interface table
•RFC 1493: Bridge MIB
•Interim Local Management Interface (ILMI) MIB
•RFC 1512: FDDI MIB
•RFC 1695: AToM MIB
•ATM RMON
•LAN Emulation Client (LEC) MIB (ATM Forum LANE v. 1.0)
•Cisco LAN Emulation Configuration Server (LECS), LAN Emulation Server/broadcast and unknown server (LES/BUS) MIB
•Private Network-Network Interface (PNNI) MIB
•LECS, LES, BUS, MIB
•RFC 1285: SMT 7.3
•RFC 1577: classical IP over ATM client
Ethernet:
•IEEE 802.3
•10BaseT
•10BaseFL
Fast Ethernet:
•IEEE 802.3u
•100BaseTX
•100BaseFX
Gigabit Ethernet:
•IEEE 802.3z
Fiber Distributed Data Interface (FDDI):
•ISO 9314-1 FDD physical sublayer (PHY) standard
•ISO 9314-3 FDDI physical medium dependent (PMD) standard
•Copper Distributed Data Interface (CDDI) TP-PMD standard
•ANSI FDDI X3T9.5 Station Management (SMT) 7.3
ATM:
•ATM Forum 3.1 User-Network Interface (UNI) specification
•Q.2931 signaling protocols
•LANE v.1.0
•LUNI v.2.0
•Multiprotocol over ATM (MPOA)
Safety Certifications:
•UL 1950
•EN 60950
•CSA-C22.2 no. 950
•IEC 950
Electromagnetic Emissions Certifications:
•FCC 15J Class A
•VCCI CE II
•CE Mark
•EN 55022 Class B
•CISPR 22 Class B