Sea Tel International Networks

Sea Tel International Networks

Products Category
Contact Us

Tel: +852 23892981
Fax: +852 35902333
E-mail: sales@sea-tel.com
MSN: info@sea-tel.com Skype: bluelgd

Partners
Sea Tel international HP cisco h3c juniper huawei avaya dlink alcatel-lucent Brocade Net Gear Extreme
Products

CSS11506-2AC

CSS11506-2AC
Product name:CSS11506-2AC
Item:
Details:

Manufacturer Part#: Cisco CSS11506-2AC
CSS11506-2AC Content Services Switches (CSS)

CSS11506-2AC - Cisco 11506 Content Services Switch Scm-2Ge Hd 2Sm 2Ac Fan

 Cisco CSS 11506 requires at least one switch control module (SCM) and may be configured with a second in standby mode. With the required SCM in one slot, the CSS 11506 has five additional slots supporting any combination of I/O, Secure Sockets Layer, or session accelerator modules. The Cisco CSS 11506 supports not only redundancy in switch control modules but also redundant power supplies and redundant switch modules (20 Gbps each). All SCMs support redundant disk drives.
 
Cisco CSS11506-2AC General Information:
Manufacturer: Cisco Systems, Inc 
Brand Name: Cisco 
Product Series: CSS 11000 
Product Name: 11506 Content Switch 
Product Type: Content Switch 
 
Cisco CSS11506-2AC Interfaces/Ports:
Interfaces/Ports: LAN 
 
Cisco CSS11506-2AC Media & Performance:
Performance: 40Gbps Bandwidth Aggregate 
 
Cisco CSS11506-2AC I/O Expansions:
Number of Expansion Slots: 11 
Expansion Slots: (3 Total) Switch Control Module 
Expansion Slots: (2 Total) Switch Control Module 
Expansion Slots: (2 Total) GBIC 
Expansion Slots: (4 Total) I/O Module 
Modules: 1 x Switch Control Module (SCM) 
Modules: 2 x Switch Modules 
 
Cisco CSS11506-2AC Management & Protocols:
Manageable: Yes 
Management:
SNMP
RMON
SNMP v1
SNMP v2c
SNMP
RMON
SNMP v1
SNMP v2c
 
Protocols: TCP/IP 
Protocols: HTTP 
Protocols: LDAP 
Protocols: FTP 
 
Cisco CSS11506-2AC Memory:
Standard Memory: 288MB 
 
Cisco CSS11506-2AC Storage:
Storage: 1 x 512MB PCMCIA Hard Disk 
 
Cisco CSS11506-2AC Power Description:
Input Voltage: 110V AC 
Input Voltage: 220V AC 
Input Current: 9A 
Frequency: 50 Hz to 60 Hz 
Power Consumption: 860 VA 
Power Source: Power Supply 
 
Cisco CSS11506-2AC Environmental Conditions:
Temperature: -4 degrees F (-20.0 degrees C) to 149 degrees F (65.0 degrees C) Storage 
Temperature: 32 degrees F (0.0 degrees C) to 104 degrees F (40.0 degrees C) Operating 
Humidity: Up to 95% Non-condensing Storage 
Humidity: 10% to 90% Non-condensing Operating 
Altitude: 0 ft to 10000 ft Operating 
Altitude: 0 ft to 15000 ft Storage 
Thermal Dissipation: 2936 BTU/h @ 860VA 
 
Cisco CSS11506-2AC Physical Characteristics:
Dimensions: 8.25 Height x 17.25 Width x 14 Depth 
Shipping Dimensions: 17.25 Height x 21 Width x 24.5 Depth 
Weight: 57.7lb 
Shipping Weight: 67.65 lb 
 
Cisco CSS11506-2AC Miscellaneous:
Additional Information:
Cisco CSS 11506 requires at least one Cisco SCM and can be configured with a second in standby mode
Site activity/intensity: High
Port density (FE/GE): 80/12
Hardware scalability: High
System redundancy: Yes
Session redundancy: Yes
SSL acceleration: Internal
Load balancing: Servers, caches, firewalls
Two-port Gigabit Ethernet I/O module: Maximum of 5
Sixteen-port 10/100 Ethernet I/O module: Maximum of 5
Eight-port 10/100 Ethernet I/O module: Maximum of 5
SSL module: Maximum of 5
Session accelerator module: Maximum of 5
Maximum concurrent connections: 1,000,000
Maximum supported keepalives: 512
Maximum number of VLANs2: 512
Acoustic Noise 70 dB maximum

Shock:
Operating (half sine): 21 in./sec (0.53 m/sec)
Nonoperating (trapezoidal pulse): 20G1, 52 in./sec (1.32 m/sec)
1G is a value of acceleration, where G equals 32.17 ft/sec** (9.81 m/sec**)

Vibration:
Operating: 0.35 Grms from 3 to 500 Hz (Grms is the root mean square value of acceleration)
Nonoperating: 1.0 Grms from 3 to 500 Hz

Storage - up to 2 per SCM:
512-MB hard disk or 256-MB Flash disk

Slot Configuration:
5 slots for I/O modules with one SCM
4 slots for I/O modules with two SCMs (1 active, 1 passive)

Network Utilities:
DNS Client
RADIUS Client
TACACS+ Client
HTTP Client
FTP Daemon
SNTP

Redundancy features:
Active-active Layer 5 Adaptive session redundancy
VIP redundancy
Active-standby SCM
Redundant switching fabric
Redundant power
Cisco CSS 11506 requires at least one Cisco SCM and can be configured with a second in standby mode
Site activity/intensity: High
Port density (FE/GE): 80/12
Hardware scalability: High
System redundancy: Yes
Session redundancy: Yes
SSL acceleration: Internal
Load balancing: Servers, caches, firewalls
Two-port Gigabit Ethernet I/O module: Maximum of 5
Sixteen-port 10/100 Ethernet I/O module: Maximum of 5
Eight-port 10/100 Ethernet I/O module: Maximum of 5
SSL module: Maximum of 5
Session accelerator module: Maximum of 5
Maximum concurrent connections: 1,000,000
Maximum supported keepalives: 512
Maximum number of VLANs2: 512
Acoustic Noise 70 dB maximum

Shock:
Operating (half sine): 21 in./sec (0.53 m/sec)
Nonoperating (trapezoidal pulse): 20G1, 52 in./sec (1.32 m/sec)
1G is a value of acceleration, where G equals 32.17 ft/sec** (9.81 m/sec**)

Vibration:
Operating: 0.35 Grms from 3 to 500 Hz (Grms is the root mean square value of acceleration)
Nonoperating: 1.0 Grms from 3 to 500 Hz

Storage - up to 2 per SCM:
512-MB hard disk or 256-MB Flash disk

Slot Configuration:
5 slots for I/O modules with one SCM
4 slots for I/O modules with two SCMs (1 active, 1 passive)

Network Utilities:
DNS Client
RADIUS Client
TACACS+ Client
HTTP Client
FTP Daemon
SNTP

Redundancy features:
Active-active Layer 5 Adaptive session redundancy
VIP redundancy
Active-standby SCM
Redundant switching fabric
Redundant power
 
System Requirements:
Requires WebNS 5.10 or later versions
Requires WebNS 5.10 or later versions
 
Certifications & Standards: Safety Certification:
•CSA-22.2 No. 950-UL1950
•ACA TS001
•EN60950/IEC60950
•AS/NZS 3260
•EN60825/IEC60825
•CSA-22.2 No. 950-UL1950
•Electromagnetic compliance (emissions)
•FCC CFR 47 Part 15 Class A
•FCC CFR 47 Part 15.109 Class B
•ICES-003 Class A
•CISPR 22 EN55022 Class B (to 1 GHz)
•CISPR 22 EN55022 Class A
•EN61000-3-2/IEC-1000-3-2 (power line harmonics)
•EN61000-3-2/IEC-1000-3-2 (power line harmonics)
•Electromagnetic compliance (emissions)
•VCCI V-3/01.4 Class B (to 1GHz)
•VCCI Class A
•ICES-003 Class B
•AS/NZS 3548 Class A
•AS/NZS3548 Class B

Immunity:
•EN300386 (EMC for network equipment)
•EN61000-4-8/IEC-1000-4-8 (Power frequency magnetic field immunity)
•EN61000-4-3/IEC-1000-4-2 (electrostatic discharge [ESD])
•EN61000-4-11/IEC-1000-4-11 (voltage dips and sags)
•EN61000-4-3/IEC-1000-4-3 (radiated immunity)
•ETS-300386
•EN61000-4/IEC-1000-4-4 (EFT)
•FCC Class A Compliance Notice (United States)
•EN61000-4-5/IEC-1000-4-5 (surge)
•ICES-003 Class A Compliance Notice (Canada)
•EN61000-4-6/IEC-1000-4-6 (low-frequency conducted immunity)

←[Previous:] [Next:]→

Related Products :
ME-3400G-12CS-A
Metro Ethernet Series
ME-3400G-12CS-A
DS-C9124-0-K9
DS-C9124-0-K9
DS-C9124-0-K9
CSS-11051-AC
CSS-11051-AC
CSS-11051-AC
CSS11506-NOAC

CSS11506-NOAC
CSS-11152-256M-AC

CSS-11152-256M-AC
ME-3400-24FS-A
Metro Ethernet Series
ME-3400-24FS-A
ACE-4710-BUN-SK-K9
Server Load Balancers
ACE-4710-BUN-SK-K9
CSS-11152-AC
CSS-11152-AC
CSS-11152-AC